Bioengineering materials for cardiovascular research

Surface engineering materials for improved interactions in an in-lab biological microenvironment prior to translating novel coating technology to a cardiovascular stent.

Go to the profile of Thamarasee Jeewandara
Dec 22, 2016
Upvote 3 Comment

Our study in bioengineering arrived at the main conclusion that a plasma physics based coating technology used to modify a material surface, can be applied to existing commercially available cobalt chromium stents, for improved biocompatibility. Research included experimental work in engineering, plasma physics and biochemistry to address primary aims, completed at the University of Sydney, Australia. The development of cardiovascular stents to treat coronary artery disease (CAD), was a significant early innovation (1). The challenge of addressing sub-optimal biocompatibility of cardiovascular stents via reproducible, multidisciplinary research, led to my interest in bioengineering cobalt chromium stent material alloy L605 (2).

Previous research work in plasma activated coating (PAC) technology were first conducted on a stainless steel biomaterial alloy 316L (3) (4) (5), followed by feasible translation of the optimized PAC recipe to a stainless steel coronary stent platform of the same alloy (6). The PAC technique creates a free radical reservoir on any solid material, to enable favourable biological interactions (5). Primarily cardiovascular stent modification technologies aim to lessen clinical complications of thrombosis, neointimal hyperplasia (inflammatory response resulting in artery wall thickening) and restenosis (re-narrowing of artery wall after stent implantation) (7). The intended outcome of stent modification is biofunctionalization (8), i.e., development of a stent material that displays biological function and elicits a biologically favourable response in vitro and in vivo (9).

The study was a first to deposit and characterise the PAC-L605 modification (10). Briefly, the salient features of PAC technology observed include; surface hydrophilicity, nanoscale surface thickness, microscale roughness, difference in surface chemistry compared to bare metal alloy L605 and non-delamination of PAC under increasing force of nanoindentation (10) (11). The study was also a first to visualize PAC-L605 interface via focused ion beam milling (FIB) and high resolution transmission electron microscopy (HR-TEM) to demonstrate the robust, nanoscale ionic stitching at plasma coating-material interface (Figure 1). Two PAC recipes (PAC1/PAC2) were then developed on cobalt chromium alloy L605 and used simultaneously to study surface biofunctionalization by replicating in vitro assays (4) (12).

High resolution transmission electron microscope image of PAC-L605 interfaceFigure 1. The HRTEM image (A) and corresponding inverse fast Fourier transform (IFFT) pseudo colour image (B) show the PAC-L605 interface. Notice nanoscale ionic stitching seen in gray (A) and green (B) in the corresponding images at 1.2 M x magnification and 1.1 Å resolution. Figure reproduced from reference (10).

Confirmatory results proved covalent protein binding capacity on PAC-L605 with extra cellular matrix protein tropoelastin (TE) (9). The recombinant human tropoelastin used in the study was synthesized and provided by the lab of Professor Anthony Weiss, School of Biochemistry and Molecular Biotechnology, University of Sydney (13). The outcome resulted in the use of PAC-L605 with TE (PAC-L605-TE) as another variable of surface modification, for in-lab tests conducted to understand cell-material and blood-material interactions. In total I used five different biomaterial surfaces to first observe cell on material interactions. After 5 days of cell culture, homogeneous anchorage of human coronary artery endothelial cell (hCAEC) cytoskeleton was observed on PAC2 surfaces with or without tropoelastin (Figure 2).

The anchorage of human coronary artery endothelial cell cytoskeleton on biomaterialsFigure 2. The filamentous actin (F-actin) cytoskeleton of HCAECs on biomaterials identified and visualized with immunofluorescent staining at 40x magnification. F-actin were homogeneously spread on PAC2 surfaces with/without tropoelastin (highlighted in red) and chosen for further experiments in cell-material culture (9). Figure reproduced from reference (9).

Next, to understand blood-material interactions, I first conducted static platelet rich plasma (PRP) assays and observed that protein in PRP prevented platelet/fibrin adherence to hydrophilic PAC and PAC/TE surfaces, while fibrinogen fibrils and platelets adhere to alloy L605 (Figure 3) (9). The PAC surfaces were exposed to air over a period of time, to induce surface oxidation/ageing and reassessed with static PRP, to show that PAC retained hemocompatibility with age (9). Blood-material contact was also conducted under modified flow conditions with 5 different biomaterials, as with cell culture before, to demonstrate lower clot formation specifically on PAC1 recipe surfaces, with or without tropoelastin. Similar to static assays, flow assays too did not show reduced hemocompatibility of PAC with age (or time of exposure to air) (9). After blood flow tests, I conducted immunofluorescent staining of material surfaces to quantify surface fibrin, and results showed significantly lower deposition of fibrin on the hemocompatible PAC (Figure 4).

Static Platelet Rich Plasma (PRP) Assays

Figure 3. Surface hemocompatibility tested with static PRP assays: platelet/fibrin adherence was not observed on modified surfaces (A,B) whilst aggregating on alloy L605 cobalt chromium surfaces (C), images at 1.2 K x magnification obtained via scanning electron microscopy (SEM). Figure reproduced from reference (9).

IF staining with Fibrinogen-Alexa Flour 488 and DAPI on biomaterials to detect fibrinFigure 4. Comparatively low surface fibrin clot deposition (green) with nuclei (blue) observed on hemocompatible PAC surfaces with immunofluorescence (IF), after blood flow assay (9). Figure reproduced from reference (9).

To complete the biofunctionalization study, I carried out standardized tests laid down in ISO 10993 part 4 for the biological evaluation of medical device materials in contact with blood (12). Since guidelines were specific for the evaluation of a final, finished medical device (12), tests conducted were considered a pre-analytical optimization step, to be reassessed in-lab after translation of surface coating to a cardiovascular stent platform. Briefly, biochemical events occurring after blood-material contact, activate biomarkers of coagulation and inflammation quantified in the study (Figure 5). Individual tests were conducted to specifically identify and quantify 5 biomarkers; 1) Thrombin Antithrombin complex (TAT), 2) Beta thromboglobulin (β-TG), 3) soluble P-selectin (sP-selectin), 4) soluble terminal complex C5b9 (SC5b-9) and polymorphonuclear neutrophil elastase (PMN elastase) (9). Results showed comparatively lower plasma biomarkers of TAT, β-TG, sP-selectin and SC5b-9 on modified PAC surfaces (9).

Simplified biochemical cascade of coagulation and inflammation triggered after blood-material contact

Figure 5. A highly simplified summary of the biochemical reactions triggered after blood-biomaterial contact. The highlighted components were quantified in the study. Figure reproduced from reference (9).

To recap, the study demonstrated biofunctionalization of plasma modified cobalt chromium surfaces (PAC-L605) in vitro for the first time, with applications at the artery-stent material interface for vascular compatibility of cardiovascular stents. A notable observation in bioengineering material surfaces for biofunctionalization is that isotropic nanoscale structures developed with micron-/sub-micron scale roughness facilitate cell anchorage, proliferation and differentiation (10)(14). The cell cytoskeleton is theorized to play an integral role in biomechanical sensing for coordinated attachment to a substrate (15) as inferred in the study. The in vitro models of hemocompatibility were an oversimplification of a very complex physiological system, based on previous experimental standardization (16) (17). The hemocompatibility of PAC surfaces (with/without tropoelastin) observed during flow, static and standardized blood assays were related to surface hydrophilicity (10)(18), furthermore, the properties of surface modification retained overtime regardless of surface oxidation/ageing. The multidisciplinary study arrived at the main conclusion that PAC technology used to modify alloy L605, can be applied to existing commercially available cobalt chromium stents for further in lab tests, prior to pre-clinical investigations (9).


1. Sigwart U., Puel J., Mirkovitch V., Joffre F. & Kappenberger L. Intravascular stents to prevent occlusion and restenosis after transluminal angioplasty. N. Engl. J. Med. 316, 701-706 (1987).

2. Sheiban I., Villata G., Bollati M., Sillano D., Lotrionte M. & Biondi-Zoccai G. Next-generation drug-eluting stents in coronary artery disease: focus on everolimus-eluting stent (Xience V®). Vasc. Health. Risk. Manag. 4, 31-38 (2008).

3. Yin Y., Fisher K., Nosworthy N., Bax D., Rubanov S., Gong B., Weiss A.S., McKenzie D.R., Bilek M.M.M. Covalently Bound Biomimetic Layers on Plasma Polymers with Graded Metallic Interfaces for in vivo Implants. Plasma Processes and Polymers. 6, 658-666 (2009).

4. Waterhouse A., Yin Y., Wise S.G., Bax D.V., McKenzie D.R., Bilek M.M, Weiss A.S., Ng M.K. The immobilization of recombinant human tropoelastin on metals using a plasma-activated coating to improve the biocompatibility of coronary stents. Biomaterials. 31, 8332-8340 (2010).

5. Bilek, M.M.M., Bax, D.V., Kondyurin, A., Yin, Y.B., Nosworthy, N.J., Fisher, K., Waterhouse, A., Weiss, A.S., dos Remedios, C.G., McKenzie, D.R. Free radical functionalization of surfaces to prevent adverse responses to biomedical devices. PNAS. 108, 14405-14410 (2011).

6. Waterhouse A., Wise S.G., Yin Y.B., Wu B., James B., Zreiqat H., McKenzie D.R., Bao S., Weiss A.S., Ng M.K., Bilek M.M. In vivo biocompatibility of a plasma-activated, coronary stent coating. Biomaterials. 33, 7984-7992 (2012).

7. Jeewandara T.M., Wise S.G., Ng M.K. Biocompatibility of Coronary Stents. Materials. 7, 769-786 (2014).

8. Nyanhongo G.S., Steiner W., Gubitz G.M. Biofunctionalization of Polymers and their Applications. Springer Berlin Heidelberg. 125, 29-45 (2011).

9. Jeewandara T.M., Bioengineering cobalt chromium cardiovascular stent biomaterial for biofunctionalization. Cold Spring Harbor Laboratory Press. bioRxiv Preprint, 1-17 (2016).

10. Jeewandara T.M. Bioengineering cobalt chromium cardiovascular stent biomaterial for surface enhancement and characterization. Winnower. Preprint, 1-17 (2016).

11. Oliver W.C. & Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mat. Res.19, 3-20 (2004).

12. Seyfert U.T., Biehl V & Schenk J. In vitro hemocompatibility testing of biomaterials according to the ISO 10993-4. Biomol. Eng. 19, 91-96 (2002).

13. Martin S.L., Vrhovski B & Weiss A.S. Total synthesis and expression in Escherichia coli of a gene encoding human tropoelastin. Gene. 154, 159-66 (1995).

14. Gittens R.A., McLachlan T., Cai Y., Berner S., Tannenbaum R., Schwartz Z., Sandhage K.H & Boyan B.D. The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation. Biomaterials. 32, 3395-3403 (2011).

15. D.E, Ingber. Cellular tensegrity: defining new rules of biological design that govern the cytoskeleton. J. Cell. Sci. 104, 613-627 (1993).

16. Gaamangwe T., Babbar V., Krivoy A., Moore M & Kresta P. Medical Device Risk Managment for Performance Assurance Optimization and Prioritization. Biomed. Instrum. Technol. 49, 446-451 (2015).

17. Gaamangwe T., Peterson S.D & Gorbet M.B. Investigating the Effect of Blood Sample Volume in the Chandler Loop Model: Theoretical and Experimental Analysis. Cardiovasc. Eng. Technol. 5, 133-144 (2014).

18. Prentner S., Allen D.M., Larcombe L., Marson S., Jenkins K & Saumer M. Effects of channel surface finish on blood flow in microfluidic devices. Microsys. Technol. 16, 1091-1096 (2010).

Go to the profile of Thamarasee Jeewandara

Thamarasee Jeewandara

Research Associate , CUNY/Einstein Coll. Med.

Bioengineering, biochemistry and molecular biology

No comments yet.